Peblar Business 22 kW MID charging station – Type 2 fixed cable 5 or 7.5 meters

The Peblar Business is the charging station we sell most often. A Dutch brand from Eindhoven, with a built-in MID meter and up to 22 kW charging capacity. It has a fixed Type 2 cable: you grab the plug from the charging station and charge, without having to get a cable out of the boot first. You choose the length: 5 or 7.5 meters.

• ✔ Free shipping to the Netherlands and Belgium
• ✔ Paying with iDEAL? Then you get an extra RFID tag for free
• ✔ Seen it cheaper somewhere? Send us the link, and we'll take a look
• ✔ Unsure about your fuse box or car? Give us a call, we'll help you figure it out

5 meters or 7.5 meters?

Choose the 5-meter cable if your car is always parked close to the charging station, for example in the garage, under a carport, or if the charging port is on the side facing the charging station. You'll have less cable to wind up.

The 7.5-meter cable is the most popular and safest choice. You don't have to park perfectly, and it will reach your charging port even if it's on the other side of the charging station or if there are two cars in the driveway charging alternately. You'll notice every day if a cable is just a little too short.

Prefer to charge with your own separate cable? Then the Peblar Business socket is also available: the same charging station, without a fixed cable.

Get money back with ERE or claim it from your employer

The MID meter is built into the charging station itself and measures exactly how much electricity goes to your car. You need this to claim your charging costs from your employer or leasing company, and to get money back for the electricity you use for home charging via ERE certificates. A separate meter in the fuse box does not count for this.

Let's be honest about that 22 kW

On a 3-phase connection, the Business charges up to 22 kW. Most electric cars charge at a maximum of 11 kW at home, so in practice you will often charge at 11 kW. That's no problem: your car will be well charged overnight. And if you later get a car that can charge faster, you won't need to replace the charging station.

Load balancing: do you need it?

Do you have a limited connection capacity, a heat pump, or an induction cooktop? Then you want load balancing, so your main fuse doesn't trip when everything is switched on at the same time. With the Peblar, this can be done in two ways: with the HomeWizard P1 Meter on your smart meter, or with the Peblar Load Balancing Kit with CT clamps in the fuse box. Unsure? Give us a call, and we'll take a look at your fuse box with you.

Home, business, or VvE

With the included RFID tag, you determine who is allowed to charge. The Business is connected via ethernet, wifi, or 4G and supports OCPP 1.6-J, so you can link it to a charging card or back office for billing. The charging station is prepared for charging with solar power and for bidirectional charging (V2G).

Installation

A charging station should be on its own circuit in the fuse box and installed according to NEN 1010. Your own installer can do this, or you can have us install your charging station in the northern and central Netherlands, with an estimated price provided in advance. No suitable wall near your parking space? The Business can also be mounted on a mounting post.

Peblar Business or Peblar Home?

Don't you claim anything and don't want an ERE subsidy? Then you don't need a MID meter and the Peblar Home is a cheaper choice: up to 11 kW, also with a fixed cable of 5 or 7.5 meters. Keep in mind that you cannot get an ERE subsidy without a MID meter. We would rather sell you a charging station that suits your needs than the most expensive one. Unsure? Use the selection guide or compare all charging stations with a MID meter.

Specifications

• Charging capacity: up to 22 kW (3-phase, 32 A)
• Connection: fixed Type 2 cable of 5 or 7.5 meters
• Energy measurement: built-in MID-certified meter
• Access: RFID, tag included
• Connection: ethernet, wifi, and mobile network (2G/4G)
• Protocol: OCPP 1.6-J
• Load balancing: via the P1 port of your smart meter or via CT clamps
• Prepared for charging with solar power and bidirectional charging (V2G)
• Protection class: IP54, for indoor and outdoor use
• Mounting: on the wall or on a mounting post
• Dimensions: 387 x 207 x 128 mm, weight approx. 2.9 kg (without cable)
• Warranty: 3-year manufacturer's warranty
• Manufacturer's item number: 6004-2300-8105 (5 meters), 6004-2300-4605 (7.5 meters)